Share this...
Share on Facebook
Pin on Pinterest
Tweet about this on Twitter
Share on LinkedIn
Share on StumbleUpon

Floor Sanding Basics for The Homeowner

Floor sanding is easy, but it has lots of work involved. It can be pretty tedious, and sometimes things can go wrong, and you may have to sand floors yourself. Not only is this not recommended, but it can also be hazardous. So, if you want to make sure your floors get the best possible look, then it may be worth considering having a professional do it. Here are a few essential tips to follow when the floor sanding yourself. First of all, before you start sanding anything, make sure that there are no loose floorboards, insulation, or staples on the floor. Any of these things can quickly come loose, and you will be sanding around them. And, of course, you should be aware of the potential dangers when doing floor sanding yourself. One of the most common mistakes people make when doing their own Adelaide Floor Sanding is using too coarse sandpaper. Instead of just using the correct type of sandpaper for your wood floors, you may end up getting much coarser sandpaper that scratches the floor instead of smoothing it out. Another thing that can go wrong is using the wrong type of power tools to do the sanding. For instance, some people will use an electric orbital sander instead of a drum sander. The problem with this is that the blades of the sander can quickly become dull, which means you are not going to get the smoothest result from your floor sanding project. And, any dust particles that are kicked up during the sanding can easily fall onto the floorboards and ruin them. Also, it would help if you used only power tools designed for hardwood floors from Adelaide Floor Sanding. These types of tools are specially designed to work with natural hardwood. This means that they are more likely to cut smoothly and leave less room for slippage than other tools. This can be important because many DIY hardwood floor sanding projects that you might try at home can become very intricate. If you are using an inexpensive power sander for your project, chances are it will not work as well as you would like. Also, before you go through with your hardwood floor sanding, ensure that you have all the necessary grits pre-calibrated. Grits give the dust a better grip to not slip along the boards during the sanding process. Without grits, the boards may not be able to move as smoothly, leading to a lot of missed areas and a generally unprofessional look. There are also many other DIY floor sanding mistakes that you can make while working on your floors. One of the worst mistakes you can make is not wet the floor with water before you start. Wet sandpaper tends to give the best results. Plus, when you are sanding your floorboards, some of the grain will not be covered up if you do not wet the surface. For best results, use water from a bucket or water hose. Some homeowners will also choose to get rid of the finish on their hardwood floor sanding machines. Homeowners may find that this option is the best way to achieve a smooth and even look. However, there are some drawbacks to refinishing your machine. First, by removing the finish, you are likely to cause uneven wear on the wood. This unevenness will show up as spots when you apply the finish. If you are using a flat grain finish, you may also see some colour differences.